Caution: Ensure that the relevant electrical circuit is isolated before removing a light unit of Fiat Punto. If in doubt, disconnect the battery negative terminal.

Headlight of Fiat Punto

Removal

1 Remove the front bumper.
2 Unscrew the headlight side and upper securing bolts (see illustration).



Unscrew the headlight side and upper securing bolts (arrowed)


3 Withdraw the inner edge of the headlight unit from its location then disengage the locating peg from the front wing (see illustrations).



Withdraw the inner edge of the headlight unit from its location ...



... then disengage the locating peg (arrowed) from the front wing


4 Disconnect the wiring connector and remove the headlight unit from the car (see illustration).



Disconnect the wiring connector and remove the headlight unit


Refitting

5 Refitting is a reversal of removal. On completion, it is advisable to have the headlight beam alignment checked.

Indicator side repeater light of Fiat Punto

6 The procedure is described as part of the bulb renewal procedure.

Rear light cluster of Fiat Punto

7 The procedure is described as part of the bulb renewal procedure.

Rear number plate light of Fiat Punto

8 The procedure is described as part of the bulb renewal procedure.

High-level stop-light of Fiat Punto

9 The procedure is described as pan of the bulb renewal procedure.