Steering column switches of Fiat Punto

Removal

1 Remove the steering wheel.
2 Remove the steering column shrouds.
3 Remove the airbag clockspring.
4 Using an Allen key. slacken the clamp ring bolt at the rear of the switch unit (see illustration).



Slacken the clamp ring bolt (arrowed) at the rear of the stalk switch unit


5 Withdraw the stalk switch unit off the steering column and disconnect the switch wiring connectors (see illustration).



Withdraw the stalk switch unit and disconnect the wiring connectors


Refitting

6 Refitting is a reversal of removal. Refit the airbag clockspring, steering column shrouds and steering wheel.

Facia switches of Fiat Punto

7-8 The switches mounted in the centre of the facia and around the instrument panel are sealed units and cannot be individually removed.

Centre console switches of Fiat Punto

10 Carefully prise the switch control panel from the centre console.
11 Disconnect the wiring connectors from the rear of the switches and remove the control panel. Note that the individual switches cannot be removed separately from the panel.
12 Refitting is a reversal of removal.