Washer fluid reservoir of Fiat Punto

Removal

1 Firmly apply the handbrake, then Jack up the front of the car and support it securely on axle stands. Remove the left-hand front roadwheel.
2 Undo the retaining screws and remove the wheel arch liner.
3 From under the wheel arch undo the two reservoir retaining bolts.
4 Lower the reservoir from its location and disconnect the washer pump wiring connectors and the fluid hoses. Remove the reservoir from under the wheel arch.

Refitting

5 Refitting is a reversal of removal.

Washer pump(s) of Fiat Punto

Removal

6 Remove the washer fluid reservoir.
7 Release the spring clip, then pull the washer pump from the reservoir. Where applicable, recover the grommet.

Refitting

8 Refitting is a reversal of removal.

Windscreen washer nozzles of Fiat Punto

Removal

9 Open the bonnet.
10 Working under the bonnet, depress the securing tabs and push the relevant nozzle from the bonnet. Disconnect the fluid hose, and withdraw the nozzle.

Refitting

11 Refitting is a reversal of removal.

Tailgate washer nozzle of Fiat Punto

Removal

12 Remove the high-level stop-light.
13 Working in the tailgate aperture behind the high-level stop-light, disconnect the washer fluid hose from the nozzle.
14 Depress the securing tabs and push the nozzle from the tailgate.

Refitting

15 Refitting is a reversal of removal.